cable_latch_systems_glassmaster_controls.pdf | |
File Size: | 1151 kb |
File Type: |
This 3A4973-series double latch cable assembly is available in short lengths of 2ft (609.6mm), 3ft (914.4mm), 4ft (1219.2mm), 5ft (1524mm), and long lengths of 6ft (1828.8mm), 7ft (2133.6mm), 8ft (2438.4mm) & 9ft (2743.2mm). These overall lengths are measured from inside edge of T-handle to the outer edge of the threaded pin housings. Assembly includes pin and housing combination #1, with mounting brackets at T-handle end and at both pin ends, plus 2 striker plates. Sale price for 1pc orders will be the same for all cable lengths. 3D model available upon request.
This 3A4973-series double latchcable assembly is available in short lengths of 2ft (609.6mm), 3ft (914.4mm), 4ft (1219.2mm), 5ft (1524mm), and long lengths of 6ft (1828.8mm), 7ft (2133.6mm), 8ft (2438.4mm) & 9ft (2743.2mm). These overall lengths are measured from inside edge of T-handle to the outer edge of the threaded pin housings. Assembly includes pin and housing combination #1, with mounting brackets at T-handle end and at both pin ends, plus 2 striker plates. Sale price for 1pc orders will be the same for all cable lengths. 3D model available upon request.
This 3A4974-series single latch cable assembly is available in short lengths of 2ft (609.6mm), 3ft (914.4mm), 4ft (1219.2mm), 5ft (1524mm), and long lengths of 6ft (1828.8mm), 7ft (2133.6mm), 8ft (2438.4mm) & 9ft (2743.2mm). These overall lengths are measured from inside edge of T-handle to the outer edge of the threaded pin housings. Assembly includes pin and housing combination #1, with mounting brackets at T-handle end & pin end, plus 1 striker plate. Sale price for 1pc orders will be the same for all cable lengths. 3D model available upon request.
This 3A4974-series single latch cable assembly is available in short lengths of 2ft (609.6mm), 3ft (914.4mm), 4ft (1219.2mm), 5ft (1524mm), and long lengths of 6ft (1828.8mm), 7ft (2133.6mm), 8ft (2438.4mm) & 9ft (2743.2mm). These overall lengths are measured from inside edge of T-handle to the outer edge of the threaded pin housings. Assembly includes pin and housing combination #1, with mounting brackets at T-handle end & pin end, plus 1 striker plate. Sale price for 1pc orders will be the same for all cable lengths. 3D model available upon request.
The 3A5072 latch pin assembly uses a non-removable pull knob of 1.0" (25.4mm) dia. black nylon and includes neoprene o-ring to seal between knob and threaded housing. Pin material is stainless steel at .348" (8.84mm) dia. Pin is extended at approx. 1.0" (25.4mm) and travels inward .50" (12.7mm) resulting in approx. .50" (12.7mm) pin extension when the knob is fully pulled. The threaded pin housing is 1/2-20 UNF thread size and material is clear zinc plated steel for 240hr salt spray. Available thread length between fasteners will allow for mounting in panel thicknesses up to .563" (14.3mm). Both the internal compression spring and 1/2-20 hex nut are stainless steel & theinternal tooth lock washer is stainless steel or zinc plated steel to 240hr min. salt spray. The 1/2-20 face-nut at the pin end is removable and is made from clear zinc plated steel for 240hr minimum salt spray. Overall assembly length is approx. 3.8" (96.5mm) measured from the outer edge of knob to the outer radius of spring loaded pin. Also available in our 3A5228 configuration which includes 5M4754 stainless steel mounting bracket and matching 5M4753 stainless steel striker plate. 3D model available upon request.
This 3A5228 latch pin assembly is made up of our 3A5072 latch pin assembled to our 5M4754 stainless steel mounting bracket and includes one 5M4753 stainless steel striker plate. Pull knob is 1" (25.4mm) OD black nylon and includes neoprene o-ring to seal between knob and threaded housing. Pin material is stainless steel at .348" (8.84mm) dia. Pin is extended at approx. 1.0" (25.4mm) and travels .50" (12.7mm) to approx. .50" (12.7mm) extension when knob is fully pulled. Threaded pin housing is 1/2-20 UNF thread size and material is zinc plated steel for 240hr salt spray. Internal spring is stainless steel. 3D model available upon request.
|
phone |
269.382.2010 (tel)
269.345.5613 (fax) |
address |
Glassmaster Controls
831 Cobb Avenue Kalamazoo, MI 49007 |